B05 耐扭式接头

发布时间:2019-08-10浏览次数:136

螺牙规格:公制牙(Metric), PG牙、G(PFBSP/PS) 牙

产品材质: A.C.F 部分采用UL认可之尼龙PA66 (防火等级UL94V-2)制成;(可定制UL认可的V-O防火等级尼龙原料); B.D部分采用三元乙丙耐侯橡胶制成。(可定制耐寒、耐高温橡胶;耐高酸碱、耐化学与抗腐蚀橡胶)。

工作温度:静态-40C至100°C ,或瞬间可耐热至120°C ;动态-20°C至80°C ,或瞬间可耐热至100°C。

颜色:黑色、灰色。其它颜色可定做。

防护等级: IP68

产品特性:夹紧爪与密封件特殊之设计,配合迫紧头装配省时便利,夹紧电缆范围大,抗拉力特强,可防水、防尘、防盐、耐酸碱、酒精、油、脂及一般溶剂。

Screw specification: Metric, PG and G (PFBSP/PS) teeth

Material Material: Part A.C.F is made of UL-approved nylon PA66 [Fire Grade UL94V- 2]; (Can customize UL-approved V-0 fire- resistantnylon raw materials); Part B.D is made of EPDM weatherproof rubber.

Customized cold and high temperature resistant rubber, acid and alkali resistant, chemical and corrosion resistant rubber.

Working temperature: Static - 40 C to 100 C, or instantaneous heat resistance to 120 C; dynamic - 20 Cto 80 C, or instantaneous heat resistance to 100 C.

Colour: Black, grey. Other colours can be customized.

Protection Level: IP68

Product characteristics: special design of clamping claws and seals,time-saving and convenient assembly with pressing head, wide clamping cable range, strong tensile force, water-proof, dust-proof,salt-proof, acid-alkali-proof, alcohol, oil, grease and general solvents.


无锡亿航电工器材有限公司微信扫码 关注我们

  • 24小时咨询热线0510-85609263

  • 移动电话13665186265

Copyright © 2019 无锡亿航电工器材有限公司 版权所有 地址:江苏省无锡市扬名开发区 网站地图 苏ICP备20039358号